• 6 Axis
• 275 Lb./120 Kg Capacity
• Control
• Base Plate
• Pendant
• 2002

• Model C4-10
• 4,ooo Lb. Capacity
• 10′ Long
• 3 Swivel Hooks

• 1750 RPM
• 7.5 HP
• Power Elevation
• Clamp & Rapid
• Tap Leads
• Hydraulic Shift
• Box Table

Clearing 200 Ton Gap Frame Press

• 200 Ton capacity
• Back Geared, Double Crank
• Air Clutch & Brake
• Air Counterbalances
• 20″ Stroke
• 42″ Shut Height; SDAU to Bed
• 6″ Slide Adjustment
• 25 SPM
• 72″ x 42″ x 6″ Bolster Plate; T-Slotted
• 72″ x 42″ T-Slotted Slide Face
• 72″ x 42″ x 17″ ram Spacer (Box Type)
• Automatic Lubrication
• Flush Floor

Danly Model S2-500-120-48 Straight Side Press      New 1968

• 500 Ton Capacity
• Welded Steel, Tie Rod Construction
• 2 Point, Eccentric Drive
• 16″ Stroke
• 15 – 30 SPM
• 35″ Shut Height, SDAU to Bed
• 10″ Adjustment
• 120″ x 48″ x 7″ Bolster Plate; T-Slotted
• 120″ x 48″ Slide Face; T-Slotted
• 36″ x 27″ H Windows
• 60 HP; 230/460/3/60
• Pit Required

Equipped With:

Air Clutch/Brake/Counterbalances, Automatic Lubrication, Air Cushions (3) x 8″ Stroke, Micro-Inch Control, Knockout System, OmniLink 5000 Press Control, Light Curtains, Hydraulic Overload System

• 9″ x 11″ Bed
• 3″ Stroke
• 10″ Daylight
• Dual Palm Button Control
• 3/4 HP; 115/1/60

• 9″ x 11″ Bed
• 3″ Stroke
• 10″ Daylight
• Dual Palm Button Control
• 3/4 HP; 115/1/60

• 36″ Throat
• 12″ Height
• 27″ x 34″ & 20″ x 17″ Tables
• 25-6000 FPM
• Welder
• Grinder
• Air Pump

• Crushes 5 Gallon to 55 Gallon Drums
• Mechanical Action
• Honda 13 HP Gasoline Engine
• Crushes 100 Drums/Hour to 8″ Height
• New

• 2″ Bar Capacity
• 19.7″ Maximum Swing
• 13.8″ Maximum Turning Diameter
• 15.7″ Maximum Turning Length
• A2-6 Spindle Nose
• 2.9″ Spindle Bore
• 50-5000 RPM Spindle
• 15/20 HP
• 7.7″ X-Axis Travel
• 16.9″ Z-Axis Travel
• 1181 IPM Rapid Traverse X/Z
• 4 MT Tailstock Quill Tape
• 3.15″ Tailstock Quill Diameter
• 3.94″ Tailstock Quill Stroke
• 72″ x 100″ Floor Space
• 9,300 Lbs. Approximate Weight
• Equipped With:  Fanuc 21T Control, Tool Presetter, 8″ 3 Jaw Howa Hydraulic Chuck, Parts Catcher, 12 Position Turret, Programmable Tailstock, Turbo Chip Conveyor, Manuals

Hyundai WIA  F500/50 Vertical Machining Center     New 2014

• 345 Hours Run Time
• 47″ x 20″ Table
• 1765 Lb. (800 kg) Table Capacity
• Travels:  43.3″ X, 20″ Y, 25″ Z
• CAT 50 Spindle Taper
• 6000 RPM
• 20 HP / 15 HP Cont.
• 24 Tool ATC
• Automatic Lubrication
• Hyundai WIA Fanuc i Series Control (Fanuc 32i)
• LNS Turbo HB Chip Conveyor
• Power Cool Cyclone Bag Filter System
• Through Tool Coolant
• Hitech S Oil Cooling Unit (Spindle Chiller)
• Weight:  16,500 Lbs. (7500 kg)

• Model EP20-ESP; New 1998
• 72 CFM
• 125 PSI Operating Pressure
• 20 HP; 208/3/60
• Tank Mounted; 120 Gallon Capacity
• 23,937 Hours

• CAT 50, CAT 40, BT 40, BT 30, NST 50, NST 40
• End Mill Holders, Collet Chucks, Bilz Floating Tap Holders, Face Mill Holders, Morse Taper Holders
• Adjustable Boring Heads (Rough & Fine), Face Mills, End Mills, Taps, Drills
• Hydraulic Chucks, Cham Drills, Indexable Drills, Boring & Threading Bars
• Turning Tools, VDI Tool Holders, Live Tool Holders
• Sandvik, Vari-Lock, Capto, Valenite, Walters, SECO, Carboloy, Kennemetal….

Mattison Model 24, 48″ Rotary Surface Grinder     New 1978

• 48″ Magnetic Chuck
• 24″ Segmented Wheel
• 100 HP
• 23/460/3/60
• 24″ Vertical Capacity
• 56″ Swing
• Spindle Tilt
• External Coolant System With Paper Filtration
• Electro-Matic Magna-Flux Chuck Control

• Model M11 Mechan-I-Cut
• 11″ x 14″ Capacity
• Coolant
• 5 HP; 230/460/3/60

• 1.5″ (38 mm) Max. Material Width
• 1.97″ (50 mm) Max. Stroke Length
• .040″ (1.0 mm) Max. Strip Thickness
• 270 Cycles/Min. @ Max. Stroke Length
• 20 Lb. (9 kg) Pulling Capacity
• 24 V Solenoid Valve Control
• (4) Available

• Model A2-18-R1
• 6,000 Lb. Capacity
• 11′ Long

• 1250 Degrees
• 9″ Dia. x 16″ Deep
• 220/1/60

Takang VMC-1700S Vertical Machining Center   New 2011

• 2816 Hours Run Time
• 78.3″ x 33.46″ Table
• 5500 Lb. (2495 kg) Table Capacity
• Travels:  66.9″ X, 35.4″ Y, 33.3″ Z
• Fanuc 18i-MB Control, Fanuc Drives
• CAT 50 Spindle Taper
• 6000 RPM, Geared Head, 2 Ranges
• 25 HP, 220/3/60
• 32 Tool ATC; Double Arm Type
• Box Ways, All Axes
• Automatic Lubrication
• Spindle Chiller
• Through Spindle Coolant
• Full Enclosure
• S.S. Way Covers
• Chip Conveyor
• 175″ x 114″ x 125″ H
• 33,075 Lbs (15,000 kg)

Takang VMC-3200S Vertical Machining Center        New 2011

• 5212 Hours Run Time
• 128″ x 48.3″ table
• 9000 Lb. (4080 kg) Table Capacity
• Travels:  126″ X, 43.3″ Y, 35.4″ Z
• Fanuc 18i-MB Control, Fanuc Drives
• CAT 50 Spindle taper
• 6000 RPM, Geared Head, 2 Ranges
• 35 HP, 220/3/60
• 32 Tool ATC; Double Arm Type
• Box Ways, All Axes
• Automatic Lubrication
• Spindle Chiller
• Through Spindle Coolant
• Full Enclosure
• S.S. Way Covers
• 2 Chip Conveyors
• 300″ x 171″ x 131″ H
• 52,920 Lbs (24,000 kg)

NOTE:  Front enclosure and doors were removed to accommodate a large workpiece.  They are with machine.

Thompson 3BB, 12″ x 36″ Hydraulic Surface Grinder

• 12″ x 36″ Electromagnetic Chuck
• 24″ Diameter Wheel
• 10 HP; 230/460/3/60
• Power Wheel Head elevation
• OTW Dresser
• Coolant

Trio Tool Face Grinder

• 18″ Diameter Segmented Wheel
• 15 HP; 230/460/3/60
• 22″ x 14″ Electromagnetic Chuck
• Power Knee Elevation
• Automatic Lubrication
• Coolant

USI-Clearing Model SE4-400-84-60B Straight Side Press

• 400 Ton Capacity
• Welded Steel, Tie Rod Construction
• 4 Point, Eccentric Drive; Plunger Guided
• 8″ Stroke
• 25 – 50 SPM
• 32″ Shut Height, ADAU to Bolster (W/15″ Ram Spacer)
• 8″ Adjustment
• 84″ x 60″ x 6″ Bolster Plate; T-Slotted
• 84″ x 60″ x 4″ Ram Plate; T-Slotted
• 84″ x 60″ x 15″ Ram Spacer (Box Type)
• 44″ x 28″ H Windows
• 60 HP; 230/460/3/60
• Flush Floor

Equipped With:

Air Clutch/Brake, Air Counterbalances, Automatic Lubrication, Gemco Die Protection/Automation Control

• 1/4″ x 10′ Capacity
• 4′ Squaring Arm
• 36″ Manual Back Gauge